BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil is a modern gasoline engine oil designed for API SP performance. API SP addresses low-speed pre-ignition, timing-chain wear and deposit control. Use only where the vehicle manufacturer specifies or permits API SP and SAE 0W-20.
- API performance level: SP
- SAE viscosity grade: 0W-20
- Supports LSPI protection
- Helps control timing-chain wear, deposits, sludge and varnish
- Available packaging: 1 L, 2 L, 3 L, 4 L, 5 L, 7 L, 16 L, 18 L, 20 L, 25 L, 200 L, 208 L, 1000 L
Request an OEM or private-label quote
Typical Technical Data
| Property | Typical value |
|---|---|
| Appearance | Clear |
| Kinematic viscosity at 100 deg C | 8.540 mm2/s |
| Cold cranking viscosity at -35 deg C | 5424 mPa s |
| Pour point | -46 deg C |
| Flash point (COC) | 230 deg C |
| Noack evaporation loss | 9.8% |
| Viscosity index | 186 |
| Mechanical impurities | None |
| Water content | Trace |
| Foaming tendency/stability (24 deg C / 93.5 deg C / after 24 deg C / 150 deg C) | 5/0, 20/0, 5/0, 50/0 mL/mL |
| Reference standard | GB 11121-2025 |
Typical values are representative test data and are not guaranteed manufacturing specifications; minor batch-to-batch variation may occur. No API license, OEM approval, fuel-economy claim or drain interval is implied.
Product Overview
Formulated for modern gasoline engines where the stated API SP performance level and SAE viscosity grade are specified. The balanced detergent, dispersant, anti-wear and oxidation-control system is designed to support engine cleanliness and dependable protection in varied driving conditions.
Key Benefits
- Helps control sludge, varnish and piston deposits
- Supports wear protection for timing-chain and other critical engine components
- Helps resist oxidation and viscosity increase during high-temperature operation
- Supports low-temperature starting and oil circulation according to the selected SAE grade
Recommended Applications
Passenger cars, SUVs, MPVs and light-duty gasoline vehicles requiring API SP at the stated SAE grade. Confirm the vehicle manufacturer recommendation before use.
Product suitability depends on the equipment manufacturer specification, operating conditions and selected viscosity grade. No OEM approval is implied unless separately documented by BAKLUCK.
What is BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil?
BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil is a API SP SAE 0W-20 gasoline engine oil for Passenger cars and light-duty gasoline engines requiring API SP and SAE 0W-20. Select this product only when its stated lubricant type, performance level and viscosity match the vehicle or equipment maker requirements.
What are the main benefits?
- Helps control sludge, varnish and piston deposits
- Supports wear protection for timing-chain and other critical engine components
- Helps resist oxidation and viscosity increase at operating temperature
SAE 0W-20 supports low-temperature starting where this viscosity is specified.
Where is this lubricant used?
BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil is recommended for Passenger cars and light-duty gasoline engines requiring API SP and SAE 0W-20. Operating temperature, load, material compatibility and maintenance practice can affect product selection.
OEM, private-label and packaging enquiries
BAKLUCK supports OEM and private-label lubricant enquiries. Packaging availability depends on the product and project. Request a BAKLUCK product and packaging review.
Frequently asked questions about BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil
What specification and viscosity does BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil state?
BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil states API SP and SAE 0W-20. Confirm both requirements in the vehicle or equipment manual.
How do I confirm whether BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil is suitable?
Match BAKLUCK API SP SAE 0W-20 Gasoline Engine Oil to the lubricant type, viscosity and performance level specified by the vehicle or equipment manufacturer. Ask BAKLUCK for technical review when the requirement is unclear.
Can BAKLUCK supply API SP SAE 0W-20 gasoline engine oil for OEM or private-label orders?
BAKLUCK accepts OEM and private-label enquiries for API SP SAE 0W-20 gasoline engine oil. Share the application, required specification, packaging format and destination for project review.
Browse related Gasoline Engine Oils.
