For formulators comparing Group V ester formulations where polarity, viscosity and thermal handling require balanced evaluation, BAKLUCK Polyol Ester 3000 supplies a documented polyol ester base stock profile. The table records density at 20 °C of 0.94 g/cm³ by ASTM D1298, alongside kinematic viscosity at 100 °C of 4.4 mm²/s by ASTM D445; kinematic viscosity at 40 °C of 19.5 mm²/s by ASTM D445 adds another practical comparison point. Its Polyol Ester 3000 position makes synthetic compressor-lubricant studies a logical screening area, while low-viscosity ester blending subject to compatibility testing provides a different route for bench evaluation. These typical figures help narrow candidates but do not predict additive response, seal behavior or finished-fluid approvals. Confirm blend compatibility, target performance and applicable market requirements, then obtain the current BAKLUCK TDS and batch COA before a commercial decision.
Polyol Ester 3000
Screening Polyol Ester 3000 for synthetic compressor-lubricant studies starts with its published 4.4 mm²/s 100 °C viscosity, followed by testing in the complete additive system.
Product overview
For formulators comparing Group V ester formulations where polarity, viscosity and thermal handling require balanced evaluation, BAKLUCK Polyol Ester 3000 supplies a documented polyol ester base stock profile. The table records density at 20 °C of 0.94 g/cm³ by ASTM D1298, alongside kinematic viscosity at 100 °C of 4.4 mm²/s by ASTM D445; kinematic viscosity at 40 °C of 19.5 mm²/s by ASTM D445 adds another practical comparison point. Its Polyol Ester 3000 position makes synthetic compressor-lubricant studies a logical screening area, while low-viscosity ester blending subject to compatibility testing provides a different route for bench evaluation. These typical figures help narrow candidates but do not predict additive response, seal behavior or finished-fluid approvals. Confirm blend compatibility, target performance and applicable market requirements, then obtain the current BAKLUCK TDS and batch COA before a commercial decision.
Typical reference values
| Property | Typical value | Method |
|---|---|---|
| Density at 20 °C | 0.94 g/cm³ | ASTM D1298 |
| Kinematic viscosity at 100 °C | 4.4 mm²/s | ASTM D445 |
| Kinematic viscosity at 40 °C | 19.5 mm²/s | ASTM D445 |
| Viscosity index | 140 | ASTM D2270 |
| Flash point (COC) | 250 °C | ASTM D92 |
| Pour point | -51 °C | ASTM D97 |
| Acid number | 0.05 mg KOH/g | ASTM D974 |
Applications
- Synthetic compressor-lubricant studies
- Low-viscosity ester blending subject to compatibility testing
Frequently asked questions
Which applications merit laboratory work with Polyol Ester 3000?
A bench program for synthetic compressor-lubricant studies can use 4.4 mm²/s 100 °C viscosity as the baseline while varying additives and other base stocks.
What validation accompanies a quotation for Polyol Ester 3000?
For Polyol Ester 3000, a quotation review should include the current TDS, applicable batch COA, packaging, quantity and destination requirements.
Final specifications are subject to the current TDS and batch COA.
Product Details
For formulators comparing Group V ester formulations where polarity, viscosity and thermal handling require balanced evaluation, BAKLUCK Polyol Ester 3000 supplies a documented polyol ester base stock profile. The table records density at 20 °C of 0.94 g/cm³ by ASTM D1298, alongside kinematic viscosity at 100 °C of 4.4 mm²/s by ASTM D445; kinematic viscosity at 40 °C of 19.5 mm²/s by ASTM D445 adds another practical comparison point. Its Polyol Ester 3000 position makes synthetic compressor-lubricant studies a logical screening area, while low-viscosity ester blending subject to compatibility testing provides a different route for bench evaluation. These typical figures help narrow candidates but do not predict additive response, seal behavior or finished-fluid approvals. Confirm blend compatibility, target performance and applicable market requirements, then obtain the current BAKLUCK TDS and batch COA before a commercial decision.
Additive Technology
International Premium Additive Package
