Product Overview
Designed for comparison within Group II blends that balance clean appearance, viscosity control and finished oil durability, BAKLUCK Group II 150N Base Oil is characterized by more than its commercial grade label. The available table reports kinematic viscosity at 40 °C of 30.4 mm²/s by ASTM D445, then complements it with kinematic viscosity at 100 °C of 5.35 mm²/s by ASTM D445 and viscosity index of 109 by ASTM D2270. Those figures can guide early selection for hydraulic and circulating-oil development and frame experimental work on Group II engine-oil formulation trials. Because the material is a hydroprocessed mineral base oil, finished performance will also depend on co-base stocks and additive chemistry. Validate viscosity, volatility, oxidation, materials compatibility and regulatory requirements in the complete formulation. Current BAKLUCK TDS information and the applicable batch COA should be reviewed before procurement approval.
Key Benefits
- Published ASTM color of L0.5 supports grade selection
- Reported kinematic viscosity at 40 °C of 30.4 mm²/s provides a formulation reference
- Measured kinematic viscosity at 100 °C of 5.35 mm²/s helps compare adjacent grades
Typical Applications
- Hydraulic and circulating-oil development
- Group II engine-oil formulation trials
Typical Properties
| Property | Typical Value | Unit | Method |
|---|---|---|---|
| ASTM color | L0.5 | — | ASTM D1500 |
| Kinematic viscosity at 40 °C | 30.4 | mm²/s | ASTM D445 |
| Kinematic viscosity at 100 °C | 5.35 | mm²/s | ASTM D445 |
| Viscosity index | 109 | — | ASTM D2270 |
| Pour point | -17 | °C | ASTM D5950 |
| Flash point | 227 | °C | ASTM D92 |
| Noack evaporation loss | 12.8 | wt% | ASTM D5800 |
| Aromatics content | 0.000 | wt% | ASTM D3238 |
| Carbon residue | L0.01 | wt% | ASTM D189 |
| Total acid number | 0.003 | mg KOH/g | ASTM D974 |
| Sulfur content | 0.0005 | % | — |
| Saturates | 94.84 | % | — |
The values shown are typical reference data and do not constitute a sales specification. Final product specifications and batch values are subject to the applicable BAKLUCK TDS and COA.
Supply Options
Drum, IBC, flexitank or bulk supply is offered subject to current availability, quantity and destination.
Related Grades
Frequently Asked Questions
When might formulators evaluate Group II 150N Base Oil?
The viscosity position is defined by 5.35 mm²/s 100 °C viscosity, so hydraulic and circulating-oil development offers a defensible starting direction only with formulation testing.
Are the listed values guaranteed for every batch of Group II 150N Base Oil?
For Group II 150N Base Oil, typical values can vary. Obtain the current TDS and batch COA, then qualify the complete lubricant against its target standard.
Request Current Documents & Quotation
Contact BAKLUCK to request the current TDS, applicable batch COA and a quotation for your required quantity, packaging and destination.