Product Overview
Made from a synthetic aromatic-hydrocarbon raw material for closed heat-transfer systems operating at up to 320 C.
Key Benefits
- Outstanding thermal stability and structural stability; service life can exceed 60,000 hours within the stated operating range
- Resists coking and carbon deposition and provides self-cleaning action
- Low kinematic viscosity supports heat transfer, low pump resistance and energy savings
Applications
Petrochemical, synthetic-fiber, synthetic-resin, pharmaceutical, printing and dyeing industries.
Technical Data
| Parameter | Typical Value | Unit | Test Method |
|---|---|---|---|
| Appearance | Clear transparent yellow liquid | ||
| Composition | Synthetic aromatic hydrocarbon | ||
| Flash point, closed cup | 165 | C | |
| Flash point, open cup | 177 | C | |
| Autoignition point | 449 | C | |
| Pour point | -39 | C | |
| Density at 20 C | 1009 | kg/m3 | |
| Maximum allowable use temperature | 320 | C | |
| Maximum allowable film temperature | 340 | C | |
| Distillation initial boiling point | 294 | C | |
| Distillation 2% point | 311 | C | |
| Kinematic viscosity at 40 C | 11.25 | mm2/s | |
| Kinematic viscosity at 100 C | 2.273 | mm2/s | |
| Thermal stability test temperature | 320 | C | |
| Thermal stability test time | 720 | h | |
| Thermal stability appearance | Transparent, without suspended matter or sediment | ||
| Thermal stability degradation rate | 5.5 | % |
Specifications / Standards
GB 23971-2009 L-QC320
Available Packaging
Contact us to confirm available packaging.
Operating Notes
- Initial heating: below 120 C, keep the heating rate below 10 C/h.
- From 120 C to 140 C, heat at about 1 C/h with the auxiliary vent valve open.
- Above 140 C, heat at 10 C/h to the required temperature, then close the auxiliary vent valve.
Documents
Source: Kunlun Organic Heat Transfer Media brochure, PDF page 14.
Inquiry / Request a Quote
Contact us to confirm product availability, packaging and delivery terms.