A practical assessment of BAKLUCK PAO 30 begins with kinematic viscosity at 100 °C of 31.3 mm²/s by ASTM D445, the measured point that anchors this high-viscosity grade. The same source table provides kinematic viscosity at 40 °C of 280 mm²/s by ASTM D445 and density at 15.6 °C of 0.846 g/cm³ by ASTM D1298, giving formulators three separate checks on this synthetic hydrocarbon base stock. That combination may suit development work for high-load synthetic gear-lubricant studies; it may also support trials involving grease base fluids and viscosity-modified PAO blends. The property set is intended for candidate selection, not a finished-lubricant claim. Bench testing must establish additive response, seal compatibility, operating-temperature performance and specification compliance. Ask for the latest BAKLUCK TDS and batch-specific COA when moving from laboratory comparison to commercial use.
PAO 30 Synthetic Base Oil Commercial Supply
BAKLUCK supplies PAO 30 synthetic hydrocarbon base oil for gear, compressor and long-life industrial lubricant development. Request the current TDS, applicable batch COA, available packing and expected lead time. Provide order quantity, destination port and documentation requirements for a commercial bulk quotation.
