The PAO 100 designation of BAKLUCK PAO 100 is supported by a concrete set of typical measurements. Among them are density at 15.6 °C of 0.853 g/cm³ by ASTM D1298, kinematic viscosity at 100 °C of 100.8 mm²/s by ASTM D445, and kinematic viscosity at 40 °C of 1258 mm²/s by ASTM D445. These values position the synthetic hydrocarbon base stock for technical comparison in viscosity-modification studies in synthetic lubricants, and they offer a starting point for very-high-viscosity gear-oil and grease formulation trials. Selection should remain application-led: operating temperature, additive solubility, seal materials, oxidation control and finished-fluid requirements all need laboratory confirmation. Review the proposed formulation against current technical documentation, then verify batch-specific values on the BAKLUCK COA before commercial acceptance.

PAO 100 Ultra-High-Viscosity Base Oil Supply

BAKLUCK supplies PAO 100 synthetic hydrocarbon base oil for tacky, heavy-duty and specialty lubricant formulation studies. Buyers can request the current TDS, applicable batch COA, packing options and expected lead time. Send required volume, destination port and documentation requirements for a commercial bulk quotation.